St. Louis, MO — New Installation & Resurfacing

Concrete Driveways in St. Louis, MO

BTS Outdoor Solutions installs and resurfaces concrete driveways throughout St. Louis, MO. New pours, broom-finish, exposed aggregate, stamped decorative, and overlays — all engineered for Missouri’s freeze-thaw cycles. Licensed contractor. Free estimates — (314) 662-2505.

3–5 Days Free Estimate
A+ BBB Rated Licensed & Insured Family Owned Since 1995

Is Your St. Louis Driveway Telling You It Needs Replacement?

“A cracked, heaving driveway isn’t just an eyesore — in Missouri’s freeze-thaw climate, it gets worse every winter until it’s truly unsafe.”

Settlement Cracking

Diagonal cracks radiating from corners and mid-slab are caused by soil settlement and frost heave. Once structural cracking starts, surface patching is a temporary fix at best.

Salt Scaling

Winter road salt on unprotected or thin concrete accelerates surface scaling — the top layer flaking off and exposing aggregate. Deep scaling means the slab needs replacement, not patching.

Inadequate Width

Standard 8-10 ft driveways from the 1960s–80s can’t fit modern vehicles side by side. A driveway replacement is the opportunity to right-size for 2 vehicles and add parking pads.

Frost Heave

Slab sections pushed up by frost heave create trip hazards and damage vehicle undercarriage. In St. Louis’s clay soil, proper gravel sub-base depth is the only real fix.

31 Years Pouring St. Louis Concrete

Why Does Concrete Driveway Quality Vary So Much Between St. Louis Contractors?

Sub-Base Depth Engineering

Most driveway failures aren’t about the concrete — they’re about what’s beneath it. BTS uses 4-6 inches of compacted gravel sub-base, verified before forming. This prevents the settling and heaving that plagues St. Louis driveways.

Rebar Reinforcement Standard

Some contractors skip rebar on residential driveways to save cost. BTS installs #4 rebar on 18-inch centers on every driveway regardless of size — because St. Louis clay soil demands it.

Mix Design Specification

We use 4,000 PSI minimum concrete mix — not the 3,000 PSI builder-grade standard. Higher PSI concrete is denser, less porous, and significantly more resistant to road salt and freeze-thaw cycling.

What's Included in a New Concrete Driveway Installation?

Every BTS driveway project starts with a free site walk and itemized written estimate. From full slab demolition and sub-base preparation to rebar placement, pour, finish, and control joint cutting — every step is covered. No verbal quotes, no line-item surprises. Call (314) 662-2505 to schedule your free estimate.

As a licensed Missouri contractor based in St. Louis since 1995, BTS Outdoor Solutions has installed hundreds of residential driveways throughout Wildwood, Fenton, Ballwin, Kirkwood, Chesterfield, and all of St. Louis County. Every driveway project starts with a free site walk and itemized written estimate — no guesswork, no verbal quotes. If you need a new concrete driveway near me in St. Louis, BTS delivers the sub-base depth, rebar specification, and mix design that driveways in Missouri’s clay soil actually require.

  • Full slab demolition and removal
  • 4–6” compacted gravel sub-base
  • #4 rebar on 18” centers
  • 4,000 PSI concrete minimum
  • Broom, stamped, and exposed aggregate finishes
  • Control joint placement engineering
  • Apron connection to street
  • Optional sealing at 28-day cure
How It Works

How Does the BTS Driveway Installation Process Work?

From demo day to driving on it — five steps we execute on every concrete driveway project in St. Louis.

1

Design & Estimate

We walk the site with you, discuss width, finish options, edge detail, and drainage. Written itemized estimate provided within 24 hours.

2

Demo & Excavation

Existing slab is saw-cut, broken, and hauled. Soil is excavated to proper depth for 4-6 inch compacted gravel sub-base installation.

3

Sub-Base & Forming

Gravel base is compacted in lifts and verified. Forms are set to the proper grade with slope engineered for drainage — 1/8” per foot minimum away from structures.

4

Rebar & Pour

#4 rebar is placed on chairs at 18-inch centers. Concrete is placed, screeded, and brought to the finishing window. Broom texture, stamp, or exposed aggregate finish applied.

5

Cure & Joint Cutting

Control joints are saw-cut within 4-6 hours of pour to prevent random cracking. Surface is sealed against moisture. Drive restriction: 7 days. Full cure: 28 days.

What Do St. Louis Homeowners Say About BTS Concrete Driveways?

“BTS poured a new concrete driveway for us. The crew was on time, their forms were perfect, and the finished product is beautiful. It’s held up through two freeze-thaw seasons with zero issues.”

SM
Steve M.
New Driveway Installation — Wildwood, MO

“We had an old cracked driveway getting worse every year. BTS demoed it and poured a new one — on budget, on schedule. Professional from start to finish.”

JR
Jennifer R.
Driveway Replacement — Fenton, MO
New concrete driveway installation St. Louis MO
Concrete driveway pour St. Louis BTS
Finished concrete driveway St. Louis Missouri

How Does BTS Concrete Driveway Work Compare to Other St. Louis Contractors?

Feature
Other Contractors
BTS Outdoor Solutions
Sub-Base Depth
4 inches minimum or less
4–6 inches compacted gravel, verified before forming
Reinforcement
Wire mesh only or no reinforcement
#4 rebar on 18-inch centers, every job
Concrete Mix
3,000 PSI standard builder mix
4,000 PSI minimum — denser, salt-resistant
Control Joints
Placed by feel or skipped
Engineered joint placement, saw-cut within 6 hours
Project Documentation
Verbal quote, no paperwork
Written itemized estimate + project timeline every job
Common Questions

What Questions Do Homeowners Ask About Concrete Driveways in St. Louis?

Most residential concrete driveway installations take 3–5 days from demo to final finishing. Day 1: demo and removal. Day 2: sub-base preparation and forming. Day 3: rebar placement and pour. Days 4–5: curing, joint cutting, and cleanup. Larger projects or decorative stamping add time. We provide a project timeline in your written estimate.

We recommend waiting a minimum of 7 days before light vehicle traffic and 28 days before full heavy vehicle use. New concrete reaches about 70% strength at 7 days and full design strength at 28 days. Driving on it too early — especially in hot or cold weather — risks surface damage and tire tracking.

Standard residential driveways in St. Louis are poured at 4 inches thick over a 4–6 inch compacted gravel base. If you park RVs, heavy trucks, or work vehicles, we recommend 5–6 inches with rebar rather than wire mesh. BTS assesses your vehicle load during the estimate to recommend the right specification.

Permit requirements vary by municipality. Most residential driveway replacements don't require permits, but new driveways connecting to public streets sometimes do. BTS researches the specific requirements for your municipality and handles any necessary paperwork at no additional charge.

A properly engineered concrete driveway in St. Louis should last 30–50 years with basic maintenance including sealing every 3–5 years. Missouri's freeze-thaw cycles are the biggest durability factor — proper sub-base depth, rebar reinforcement, and high-PSI mix design determine whether your driveway lasts 15 years or 50.

Wire mesh (welded wire fabric) is less expensive but provides minimal structural support — it tends to settle to the bottom of the slab rather than staying at mid-depth. Rebar placed on chairs stays at the correct position in the slab and provides significantly more tensile strength. BTS installs #4 rebar on 18-inch centers on every driveway regardless of size because St. Louis clay soil demands it.

Achieving an exact color match between new and existing concrete is not possible because concrete weathers and changes color over time. However, BTS can select aggregate, integral color, and finish texture to complement existing flatwork. For stamped or decorative finishes, we carry samples on-site so you can compare before we pour.

Ready to Replace Your St. Louis Driveway?

Free estimates for Wildwood, Fenton, Ballwin, Kirkwood, and all of St. Louis County. We dig deep, reinforce properly, and pour concrete that lasts.

Last Updated: August 2026

Call Now Free Estimate