Concrete Cleaning
Professional hot-water concrete cleaning for driveways, patios, and walkways in St. Louis.
- Commercial hot-water equipment
- Oil and stain removal
- Same-day availability
St. Louis, MO — Same-Day Restoration
Paver Restoration in St. Louis, MO
BTS Outdoor Solutions restores pavers in St. Louis — re-leveling sunken sections, replacing joint sand, removing weeds, and sealing the surface. Most restoration projects are completed in one day. Far cheaper than full replacement. Free estimates.
A+ BBB Rated
Licensed & Insured
Est. 1995
Free Estimates
What Causes Pavers to Deteriorate in St. Louis?
Most St. Louis paver problems trace back to depleted joint sand. Once the sand washes out, pavers rock, weeds root, and the whole surface destabilizes. Missouri's freeze-thaw cycles accelerate sub-base settlement. UV exposure fades color and opens the surface to deep staining. Most paver patios and driveways near St. Louis need restoration within 5–7 years of installation — not replacement.
"A paver surface that looks worn or weedy rarely needs full replacement — it needs restoration. We see this every week in St. Louis."
Weed Takeover
Joint sand depleted, weeds rooting between pavers and accelerating joint failure. Left unchecked, root systems physically displace pavers and create trip hazards.
Sunken Sections
Sub-base settlement creating uneven surfaces, trip hazards, and water pooling. Most common at St. Louis patio perimeters and near downspout discharge zones.
Joint Sand Gone
Pavers rocking and shifting with no joint stability. Rain, foot traffic, and Missouri freeze-thaw cycles wash out standard jointing sand within 2–3 St. Louis rainy seasons.
Faded & Dull Surface
UV degradation removing color protection and opening the paver surface to deep staining. Without sealer, St. Louis's summer UV load visibly fades most pavers within 3–4 years.
1
Day — Most Paver Restorations Complete Same Day
Why Does Expertise Matter for Paver Restoration?
Polymeric Sand — Not Standard Sand
Polymeric sand activates with water and sets firm, creating weed-resistant, ant-resistant joints that hold through Missouri's rainy seasons. BTS uses polymeric sand as the standard on every restoration — not an add-on. Regular jointing sand washes out in one season.
28-Day Sealer Wait — We Honor It
Polymeric sand requires 24–48 hours to fully cure before sealing. Applying sealer too soon traps moisture and causes whitening and early failure. We wait the full cure window. Crews that rush this step create warranty problems they hope you won't notice.
Pull-and-Reset vs. Full Base Repair
Not all settlement is the same. BTS assesses whether sunken pavers can be re-leveled by pulling and re-grading, or whether sub-base failure requires excavation and base correction. We address the cause — not just the symptom.
What's Included in Paver Restoration?
A complete BTS paver restoration includes weed removal, paver re-leveling for sunken sections, fresh polymeric sand swept in and activated, and sealer application for UV and stain protection. We serve patio pavers, driveway pavers, and front walkways throughout St. Louis — same-day completion on most projects at a fraction of replacement cost.
BTS Outdoor Solutions is a licensed Missouri contractor based in St. Louis with 31 years of concrete and masonry experience. We restore paver surfaces in Kirkwood, Clayton, Webster Groves, Chesterfield, Ballwin, Sunset Hills, and all of St. Louis County. If paver restoration near me in St. Louis is what you're searching for, you've found the right crew.
Paver Re-Leveling
We pull sunken or rocking pavers, re-grade the base material or add fill as needed, and reset pavers flush with the surrounding surface. Trip hazards eliminated, water pooling corrected, stability restored.
Polymeric Sand & Joint Filling
Fine sand is swept across the entire surface, worked into all joints, and activated with a controlled water rinse. The polymer binder cures firm — locking pavers in place and resisting weeds and ant intrusion for 3–5 years.
Paver Sealing
Applied after polymeric sand has fully cured, sealer provides UV resistance to prevent fading, stain resistance to protect the surface from oil and organic staining, and enhanced color depth that restores the surface's original appearance.
How It Works
How Does the Paver Restoration Process Work?
Five consistent steps from surface inspection to final sealed result.
The BTS paver restoration process starts with understanding what's wrong before pulling anything up. Diagnosis drives the plan — not a preset service package. Most St. Louis residential projects complete in a single day, including re-leveling, polymeric sand, and sealing when conditions allow.
1
Inspection & Problem Diagnosis
We assess every section of the paver surface — identifying sunken areas, joint sand condition, individual cracked units, and overall drainage pattern.
2
Weed & Debris Removal
All weeds are pulled and joints cleared of debris. Large weed infestations may be treated before we begin to ensure roots are fully removed.
3
Re-Leveling & Reset
Sunken or rocking pavers are pulled, base corrected, and pavers reset flush. Cracked units are replaced with matching material where available.
4
Polymeric Sand Application
Polymeric sand is swept across the surface, worked into all joints, and activated with a controlled water application. Surface is allowed to cure fully before sealing.
5
Sealing & Final Rinse
After polymeric sand cure, sealer is applied in even coats. Excess is rinsed from the surface, edges cleaned, and the finished job walked with you before we leave.
What Do St. Louis Homeowners Say?
★★★★★
"My patio pavers had weeds everywhere and several sunken areas. BTS re-leveled the whole thing, packed in polymeric sand, and sealed it. Done in one day. Looks like it was just installed."
★★★★★
"Our front walkway had major settling after years of Missouri winters. BTS pulled the bad sections, fixed the base, reset everything level, and applied sealant. The whole crew was professional and quick."
How Does BTS Compare to Unlicensed Contractors for Paver Restoration?
Most homeowners have no idea how much variation exists in paver restoration quality. Basic material choice alone — polymeric sand vs. regular sand — means the difference between a joint that holds for 3–5 years and one that washes out by spring. Here's how BTS compares in practice.
Criteria
Unlicensed Contractor
BTS Outdoor Solutions
Full paver replacement upsell
Often upsold unnecessarily
Restoration saves 60–80% when viable
Same-day completion
Rare
Most projects complete same day
Polymeric sand (weed-resistant)
Sometimes basic sand used
Standard on every restoration
Licensed & insured
Often no
Yes — fully licensed & insured
Sub-base assessment included
Often skipped
Yes — root cause addressed
Sealer cure time honored
Often rushed
28-day cure window respected
Written estimate
Often verbal
Always provided in writing
Warranty on work
Uncommon
Yes
Common Questions
What Questions Do Homeowners Ask About Paver Restoration in St. Louis?
In most cases, yes. Paver restoration — re-leveling sunken sections, replacing depleted joint sand, removing weeds, and sealing — recovers the surface appearance and structural stability without the cost of full replacement. Pavers that are cracked through or physically broken need individual unit replacement, which we can do during the restoration process. We evaluate every job honestly before recommending a course of action.
A properly restored paver surface with polymeric sand and quality sealer should maintain its appearance and joint stability for 3–5 years under normal St. Louis weather exposure. The sealer UV protection fades first. We recommend a maintenance seal every 3–4 years to keep joint sand locked and surface color protected. Proper drainage and avoiding de-icing salt in winter extend restoration life considerably.
Polymeric sand is a fine sand blended with polymer binders that activates when water is applied and sets firm as it dries. Once cured, it resists weed growth, ant intrusion, and joint washout far better than regular jointing sand. Standard sand washes out over one or two St. Louis rainy seasons. Polymeric sand holds for 3–5 years under normal conditions. BTS uses polymeric sand as our standard on every paver restoration — not an upgrade.
Polymeric sand requires approximately 24–48 hours to fully cure before sealing can begin. If we apply sealer too soon, moisture trapped under the film causes whitening (efflorescence) and premature sealant failure. We wait the full cure window — typically scheduling sealing as a second visit when conditions allow — or build the drying window into single-day jobs on dry, sunny days. We will not rush this step to finish faster.
Yes. BTS restores both patio pavers and driveway pavers throughout St. Louis. Driveway paver restoration requires more attention to sub-base assessment since vehicle loads accelerate settlement differently than foot traffic. We check the sub-base condition when pulling sunken sections and address any base instability before re-setting pavers — not just reset and re-sand over the underlying problem.
After restoration, keep weeds in joint sand controlled by hand-pulling while they are small — do not use harsh herbicides near polymeric sand. Avoid de-icing salts in winter, which break down both pavers and sealant. Rinse the surface with a garden hose to remove debris. Plan a maintenance seal every 3–4 years. BTS can set you up on a maintenance schedule for the St. Louis area.
Ready to Restore Your St. Louis Pavers?
Most paver patios and driveways in St. Louis can be fully restored in a single day. Call BTS Outdoor Solutions for a free estimate. We serve Clayton, Kirkwood, Webster Groves, Chesterfield, Ballwin, and all of St. Louis County.
Keep Going
What Other Services Does BTS Offer in St. Louis?
Patios & Walkways
Luxury concrete patio and walkway installation with stamped and decorative finishes.
- Stamped concrete options
- Custom decorative finishes
- Structural outdoor builds
Concrete Sealing
Protective sealing and joint caulking to extend the life of concrete driveways and patios.
- Joint caulking included
- Stain and freeze protection
- 3–5 year sealer life
Last Updated: August 2026